Please Note: Most "Genesis" Sound Fitted Locos Now DO NOT have The Remote Control For DC Operation, Due To Non Conformity With Radio Frequencies Outside The USA.

The Locos Will Work Perfectly On any DCC System!!!

Features; Researched from the prototype to match specific units (including Conrail recessed fans and marker lights and UP raised walkway), Genesis driveline with dynamically balanced five pole skew wound motor and dual flywheels, Directional constant lighting, Highly detailed fuel tank, See-through fans, Cab interior, Factory installed Celcon handrails, Factory installed McHenry knuckle couplers.

These Prices Based On $2.00 - £1.00.

Features; All new tooling, Genesis driveline with dynamically balanced five pole skew wound motor and dual flywheels, All-wheel drive and electrical pick-up, DCC Ready Or Factory installed onboard sound and DCC decoder (Where Fitted), All DC mode sound features are operated by a wireless handheld remote. No additional control box is required to operate advanced sounds.

Cab interior, Detailed multi-piece fuel tanks, Wire grab irons, Metal lift rings, See-through fans, Celcon handrails, Photo-etched non-skid end walks, Flush mounted individual window 'glass'.

Features; All new tooling, Genesis driveline with dynamically balanced five pole skew wound motor and dual flywheels, All-wheel drive and electrical pick-up, Factory installed onboard sound and DCC decoder, All DC mode sound features are operated by a wireless handheld remote. No additional control box is required to operate advanced sounds.

Cab interior, Detailed multi-piece fuel tanks, Wire grab irons, Metal lift rings, See-through fans, Celcon handrails, Photo-etched non-skid end walks, Flush mounted individual window 'glass'.

Features; Boiler backhead with full details and printed gauges, Individually applied detail parts like piping, valves and generators, Adjustable cab windows and opening doors, Cab hatches can be opened and closed, See-through running boards, Blackened metal wheels, Factory installed DCC sound board with dual speakers, Decoder automatically senses the power supply (works with both DC and DCC systems), Includes hand-held remote control unit for DC operation, Smoke unit ready with no soldering needed.

Features; Boiler backhead with full details and printed gauges, Individually applied detail parts like piping, valves and generators, Adjustable cab windows and opening doors, Cab hatches can be opened and closed, See-through running boards, Blackened metal wheels, 22" recommended minimum radius, Pilot has opened and closed positions, Factory installed DCC sound board with dual speakers, Decoder automatically senses the power supply (works with both DC and DCC systems), Includes hand-held remote control unit for DC operation, Smoke unit ready with no soldering needed.

Key Features; Boiler backhead with printed manual controls, Individually applied piping, valves, generators. Correctly operating eccentric cranks, Adjustable cab windows, Headlights and number boards with directional light change Tender light, Five pole, skewed armature motor with two flywheels, Pivoting front and rear engines for negotiating 18” radius curves, Current pick-up on all driver and tender wheels, 8-pin connector plug between loco and tender

Overview; Giving life to all the details are authentic sounds that are channelled through a factory installed DCC and soundboard with speakers. The DCC decoder automatically senses what type of power supply is in use (conventional DC or NMRA compliant DCC) and adapts its functions.

Functions and sounds available to DCC users include: Bell, Whistle, Water injector, Air release, Blower hiss, Fire box door, Lighting direction, Coupling, Brake squeal, Conductors voice, Sand release, Cylinder cock/flange squeal.  A handheld wireless controller is included for use with conventional DC power supplies. With it, modellers can control six sound functions as well as speed and direction.

Full underbody details including complete brake rigging, Completely detailed full cushion underframe, Separately applied door closure rods, metal grab irons and end platforms, 100-Ton roller bearing trucks with operating bearing caps, Early version - photo-etched roofwalks and full height ladders, Machined RP25 profile metal wheels, McHenry scale knuckle couplers.