This Page has moved To Our New Web Site.

The DS64 Stationary Decoder allows you to install and operate your turnouts directly through any DCC system that has turnout control. The DS64 hasnt met a turnout it does not like. From Solenoid turnout machines to slow motion motors, this Is affordable & Is easy to install.

• Features ;

   

  • Easy to install and operate.

  • Operates four turnouts.

  • Slow Motion Machines (Kato Etc).

  • Solenoid Machines

  • Switch inputs for turnout control

  • LocoNet Control

  • Integral capacitor discharge.

  • Operates from track power or a separate booster.

  • Buffered switch inputs.

  • DCC compatible.

Dual Stationary Decoder

• Features ;

   

  • Simple hook up and set up.

  • Control 2 individual turnout machines. 2 Slow motion turnout machines, such as Tortoise™ by Circuitron.
    OR

  • 2 Solenoid type turnout machines such as three wire Peco or two wire bi-polar type turnout machines such as Kato Unitrack, AristoCraft, or LGB turnouts with powerful capacitive discharge capability.

  • Turnout addresses can be set individually or in groups of 2.

  • Screw terminals make installation easy!

  • DCC compatible.

  • Screw terminals make installation and set up easy.

  • Control 2 solenoid type turnout machines: 2 wire bi-polar (Kato Unitrack Switches, etc.) and/or 3 wire (Peco, Atlas Snap Switches, etc.)

  • Addresses can be independent or sequential

  • All Scales up to 22V track power

Stationary Decoder For Single Kato Unitrack Turnouts.
 

• Features ;

  • Easy to use

  • Cost effective control for a single Kato Unitrack turnout or other similar device

  • Rated at ½ amp. Great for HO & N Scale

  • Small size .319” x .509” x .152” (8.11mm x 12.94mm x 3.88mm)

Digitrax Auto Reversing Controller.

• The easiest way to add automatic reversing to a section of your layout.

• 8 amp Auto-reversing control for a single reversing district.

• Simple to wire.

• Tuneable trip current lets you use it on any layout from Z to G.

• AR1 operates with or without LocoNet so, it can be used on non-Digitrax DCC systems, too.

Preloaded with AC4400 Sound Scheme, Includes 28mm 32 Ohm Speaker & 330uF Capacitor.  

Rating; 1.0 Amp (1.3 Amps Peak), Size; 21mm x 75mm x 2.5mm, Functions; 4 x 200Ma, FX3, Features Series 3.
Click Here For Continental Modeller Review.

Preloaded with SD38-2 Sound Scheme, Includes 28mm 32 Ohm Speaker & 330uF Capacitor.  

Rating; 1.0 Amp (1.3 Amps Peak), Size; 21mm x 75mm x 2.5mm, Functions; 4 x 200Ma, FX3, Features Series 3.

Preloaded with F40PH Sound Scheme, Includes 28mm 32 Ohm Speaker & 330uF Capacitor.  

Rating; 1.0 Amp (1.3 Amps Peak), Size; 21mm x 75mm x 2.5mm, Functions; 4 x 200Ma, FX3, Features Series 3.

Features:

Wired Mobile Decoder with SoundFX™+Accessory type functions for most HO Locomotives. Preloaded with selectable steam and diesel Sound Schemes

Includes 28mm 8 Ohm Speaker & 330uF Capacitor.

Note: The SFX0416 has no motor functions and is to be used in conjunction with a standard mobile decoder such as a DH123D etc

Current Rating 1.0 Amp (total), Size 31mm x 10mm x 4mm

Installation Wired replacement decoder, Function Outputs 6-250mA (total 800mA), Function Type FX3, Features Series 3

Current Sounds Include; UK Stock, Class 108 DMU, Class 37, "Yorky" A 1960 Yorkshire Engine Co. 0-6-0 Diesel Electric Shunter, GWR Praire Tank & Standard 5. US Stock, AC4400, SD38-2, F40PH, GE Evo, SD70, Trolley Cars, E8, Challenger, SW1, GP10, RS32, FM Switcher, SD40-2, C44-9W, GP38, U33, RDC.

Features:

Wired Mobile Decoder with SoundFX™+Accessory type functions for most HO Locomotives. Preloaded with selectable steam and diesel Sound Schemes. Includes 28mm 32 Ohm Speaker & 330uF Capacitor.

Note: The SFX064D has no motor functions and is to be used in conjunction with a standard mobile decoder such as a DH123D etc

Rating; 1.0 Amp Total,

Size 31mm x 16.7mm x 6.3mm. Functions; 6-250mA (Total 800mA). Fx3.

Current Sounds Include; UK Stock, Class 108 DMU, Class 37, "Yorky" A 1960 Yorkshire Engine Co. 0-6-0 Diesel Electric Shunter, GWR Praire Tank & Standard 5. US Stock, AC4400, SD38-2, F40PH, GE Evo, SD70, Trolley Cars, E8, Challenger, SW1, GP10, RS32, FM Switcher, SD40-2, C44-9W, GP38, U33, RDC.

• Current Rating:- 1.25 Amp (2.0 Amps Peak).

• Size:- 2.877” x .667” x .173” (73mm x 16.9mm x 4.4mm) with 12.7mm stiff wires on each end.

• Installation; Board Replacement.

• Function Outputs 6.500mA, Function Type FX3.

• Features Series 3.

• Current Rating:- 1.25 Amp (2.0 Amps Peak).

• Size:- 2.877” x .667” x .173” (73mm x 16.9mm x 4.4mm) with 12.7mm stiff wires on each end.

• Installation; Board Replacement.

• Function Outputs 6.500mA, Function Type FX3.

• Features Series 3.

• Current Rating:- 1.25 Amp (2.0 Amps Peak).

• Size:- 2.877” x .667” x .173” (73mm x 16.9mm x 4.4mm) with LED On Each End.

• Installation; Board Replacement.

• Function Outputs 6.500mA, Function Type FX3.

• Features Series 3.

• Its A Plug N’ Play Sound Module For any 165 series decoder.

• It Can function as a standalone Stationary Track-side/Under-layout sound decoder.

• Fully customizable Digitrax SFX sound capability.

• Includes 28mm 32 Ohm Speaker & 330uF Capacitor.

Click here for the SFX004 (Soundbug) users manual.
 

Current Sounds Include; UK Stock, Class 108 DMU, Class 37, "Yorky" A 1960 Yorkshire Engine Co. 0-6-0 Diesel Electric Shunter, GWR Praire Tank & Standard 5. US Stock, AC4400, SD38-2, F40PH, GE Evo, SD70, Trolley Cars, E8, Challenger, SW1, GP10, RS32, FM Switcher, SD40-2, C44-9W, GP38, U33, RDC.

• You can substitute different .wav files into a sound project file (.spj) or you can start from scratch and build your own sound project.

• You can download sound projects from the Digitrax Sound Depot web site http://www.digitrax.com/sounddepot.php

• Current Sounds Include; UK Stock, Class 108 DMU, Class 37, Class 87, Praire Tank & Standard 5. US Stock, AC4400, SD38-2, F40PH, GE Evo, SD70, Trolley Cars, E*, Challenger, SW1, GP10, RS32, FM Switcher, SD40-2, C44-9W, GP38, U33, RDC.

• You can upload sound projects you have created to share with others, too!

• You can download a sound project into your Digitrax SoundFX decoder equipped locomotive.

• You can try out sound projects downloaded to your locomotives on the programming track without having to run it around the layout.

Using Digitrax PR2 Programmer and Digitrax SoundLoader TM software with your PC and programming track, you can create, manage, test, and download sound projects (.spj files) in your Digitrax SoundFX decoders. You can customize your Digitrax SoundFX decoders to your heart’s content!

Using the SoundTest TM feature you can even try out different SoundFX decoder sound projects. Just put the SoundFX equipped locomotive on the PR2 programming track and use the SoundTest feature to run the speed up or down and set any combination of functions to on or off while the locomotive remains stationary on the PR2 programming track.

Digitrax PR2 Programmer comes with:

• PR2

• SoundLoader Software

• Installation CD and instructions

• Cables needed to hook up to a 25 or 9 pin PC Serial port (USB adapters can also be used).

In addition, you will need:

• A 12-15V DC Power Supply

• A PC Computer running Windows XP with SoundLoader or equivalent program running

• An isolated programming track section, (You wont need a “power booster” to increase programming track voltage).

You can substitute different .wav files into a sound project file (.spj) or you can start from scratch and build your own sound project.
You can download sound projects from the Digitrax Sound Depot web site http://www.digitrax.com/sounddepot.php
You can upload sound projects you have created to share with others, too!
We encourage sound project file sharing among hobbyists.
You can download a sound project into your Digitrax SoundFX decoder equipped locomotive.
You can try out sound projects downloaded to your locomotives on the programming track without having to run it around the layout.
PR3 Features

Multifunction USB 2.0 PC connectivity for your railroad (Yay!)
Digitrax “SoundLoader” compatible. Programs Digitrax sound projects to SFX decoders
Programs CV’s for most DCC decoders
LocoNet MS100 mode with Fully Buffered Input and Output data
Runs on Windows XP, Vista and 2000.
Runs on Mac OS 10.4/10.5 with JMRI.
No external power needed for MS100 mode.
Automatic configuration. No jumpers or switches required. Configurations can be set by software or manually.
Selectable LocoNet termination. For standalone operation without needing a Command Station.
LED state indicator lights.
Firmware updates available from Digitrax Web site.

The PR3 is a dual-purpose USB 2.0 device - In Programmer Mode, along with SoundLoaderTM software on a PC or Mac computer, the Digitrax PR3 Programmer lets users create, manage, test, and download Digitrax sound projects to SoundFX decoders.

In MS100 Mode, the PR3 interfaces from a Windows-compatible or Mac personal computer to the Digitrax LocoNet system for use by 3rd party software such as Decoder Pro, Railroad and Co*., etc.

Using Digitrax PR3 Programmer and Digitrax SoundLoader TM software with your PC and programming track, you can create, manage, test, and download sound projects (.spj files) in your Digitrax SoundFX decoders. You can customize your Digitrax SoundFX decoders to your heart’s content!

Using the SoundTest TM feature you can even try out different SoundFX decoder sound projects. Just put the SoundFX equipped locomotive on the PR3 programming track and use the SoundTest feature to run the speed up or down and set any combination of functions to on or off while the locomotive remains stationary on the programming track.

Digitrax PR3 Programmer comes with:

PR3
SoundLoader Software
Installation CD and instructions
USB Cable needed to hook up your PC's USB port.

In addition, you Will need:

A 12-15V DC Power Supply (Power supply not needed for MS100 operation)
A Computer running Windows/MAC OS with SoundLoader or equivalent program running
An isolated programming track section (You won’t need a “power booster” to increase programming track voltage.)

Size 120mm x 87.5mm x 35mm (4.72" x 2.65" x 1.4")

• Motor 1.5 Amp (2.0 Amps Peak)

• Size 16.76mm x 30.4mm x 6.35mm.

• With 9 pin to DCC Plug  L=3.25” Wire Harness.

• Function Outputs 2-125mA.  

As Above But With Shorter Harness 1".

• Current Rating; 1.5 Amp (2.0 Amps Peak),

• Size: 16.9mm x 26.6mm x 6.35mm,

• Function Outputs; 6 x 500mA,

• Function Type; FX3,

As Above But With Shorter Harness 1".

Current Rating 1.00 Amp (2.0 Amps Peak)
Size 0.36” x 0.55 x 0.13” 9.14mm x 13.97mm x 3.3mm
Installation Plug'N Play
Function Outputs 2-500mA
Function Type FX3

Size 9.14mm x 13.97mm x 3.3mm
Function Type FX3
Features Economy Series 3
3 Function 2 x 0.5Amp, Motor 1Amp/2 Amp Peak. With Golden LED.  

 Suits Kato P42, PA1 & E8 Units.

6 Function 0.5Amp, Motor 1.0Amp/2 Amp Peak. With Golden LED's.  

 Suits The Re6/6 & Other Locos.

6 Function 0.5Amp, Motor 1.0Amp/2 Amp Peak. With Golden LED's.  

Inc F3/F7 A & B Locos, Plus Others.

6 Function 0.5Amp, Motor 1Amp/2 Amp Peak. With Golden LED.  

Inc F40PH Locos, Plus Others.

6 Function 0.5Amp, Motor 1Amp/2 Amp Peak. With Golden LED.  

Inc SD40, SD40-2 (Pre-2006) , C44-9, AC4400, SD70Mac Locos, Japanese DD51 Plus Others.

6 Function 0.5Amp, Motor 1.5Amp/2 Amp Peak. With Golden LED's.  

6 Function 0.5Amp, Motor 1.0Amp/1.5 Amp Peak. With Golden LED's. 

Inc SD80/90Mac, RS2, RSC2 Locos, Plus Others.

6 Function 0.5Amp, Motor 1.0Amp/1.5 Amp Peak. With Golden LED's.  

 Suits Kato RDC Units, Not a simple replacenent!!!.

6 Function 0.5Amp, Motor 1.0Amp/2 Amp Peak. With Golden LED's.  

Inc GP40-2, U25B, SD35, Trainmaster, B23-7 and others, Golden-White LEDs for added realism.

6 Function 500Ma, 1.Amp, 2 Amp Peak. (9.5mm x 76.2mm x 4.0mm).

Inc SD50, SD60, SD60M Locos, Plus Others.

6 Function 0.5Amp, Motor 1.5Amp/2 Amp Peak. With Golden LED's. (9.5mm x 98.3mm x 4.0mm).

6 Function 0.5Amp, Motor 1.5Amp/2 Amp Peak. With Golden LED's. (12mm x 55mm x 2.5mm).

6 Function 0.5Amp, Motor 1.5Amp/2 Amp Peak. With Golden LED's. (12mm x 55mm x 2.5mm).

6 Function 0.5Amp, Motor 1. Amp/2 Amp Peak. With Golden LED's. (9.3mm x 89.1mm x 3.378mm).

6 Function 0.5Amp, Motor 1.0Amp/1.5 Amp Peak. With Golden LED. (14.74mm x 54.83mm x 3.378mm).

4 Function (4-500Ma), Motor 1.5Amp/2 Amp Peak.

2 Function (2-500Ma), Motor 1.0Amp/2 Amp Peak. (10.6mm x 8.7mm x 2.86mm). Scaleable speed Stabilization BEMF, Transponding, SuperSonic & Sound Bug Compatible.

2 Function (2-500Ma), Motor 1.0Amp/2 Amp Peak. (10.6mm x 8.7mm x 2.86mm). Scaleable speed Stabilization BEMF, Transponding, SuperSonic & Sound Bug Compatible.

2 Function (2-500Ma), Motor 1.0Amp/2 Amp Peak. (10.6mm x 8.7mm x 2.86mm). Scaleable speed Stabilization BEMF, Transponding, SuperSonic & Sound Bug Compatible.

Click Here For PDF Manual (as Issued From Kato Japan).

Features; 1 Amp (1.5 Amp Peak), With Back EMF, Transponding (Detecting Train Position). Function, No Function Circuit.

Click Here For PDF Manual (as Issued From Kato Japan).

Features; 2 Functions 125 mA Each. Transponding (Detecting Train Position) Function, Lights switches automatically between and white and red in accordance with the direction of run of the train. The direction in installation of the p.c. board determines whether the white or red taillight lights up (Insert the P.C. board the other way around in the tail end). First detach the under-floor details and remove the switch and install the decoder where the switch was.

Click Here For PDF Manual (as Issued From Kato Japan).

Features; 1 Function 65 mA. Transponding (Detecting Train Position). Put the decoder together with white LED Passenger Car Lighting Unit and using the included bracket install them into the car.

• Features:

  • DG583AR fits locos with Aristo Craft DCC plug arrangement. Use with locos that have two motors per truck such as Aristo Craft SD45.

  • Decoder Lock equipped

• Current Rating; 5.0 Amps (10.0 Amps Peak).

• Size; 1.45” x 2.23”.

• Installation: Plug ‘N Play .

• Function Outputs; 8-2 Amp.

• Function Type; FX3.

• Features; Series 3.