22-014 Kato Controller.

• Features Include;

  • Suitable For HO And N Scale.

  • 0-12 Volt DC @ 1.5 Amp. (More Powerful Than Most Other Makes).

  • Direction And Speed Controls.

  • Direct Plug-In For UNITRACK Feeder Track Or Terminal Unijoiner®.

  • Direct Plug-In For UNITRACK Point Switch With Snap-On Socket.

  • Equipped With Circuit Breaker And Reset Button.

  • Also Includes An Adapter Cord For Connection Of Feeder Tracks By Other Manufacturers.

  • With Separate CE-Passed AC/AC Power Plug In Transformer With UK 3 Pin Plug.

  • Blister Packaging.

  • Full English Instructions.

Controller Accessories.

Point Switch.

Use With 20-202, 20-203, 20-210, 20-220 & 20-221.

These simply clip On to The Side Of The Kato Controller And You Then Just Plug The Point Lead & Plug Into The Socket at The Rear (Square & Round Pegs, So You Cant fail To Get It Right! ) And "Hey Presto" You Have a Fully Working Electric Point!! (No Soldering, No Cutting Or Drilling Holes, No Scrambling About Under Baseboards & No Swearing When You Burn your Fingers or Bang Your Head!!) They Then Clip Together So You Can make a "bank" of switches with only one power supply (as far as We Know There Is No Limit To The Number). They Also Have a "Memory" setting So If You Change the Point Manually Next Time you Use The Switch It Will Only Throw Point when Its In The Correct position.  If You Are Not Using The Kato Controller Then Use A 24-842 AC-Dc Converter And connect This To Your Accessory output On your Controller And Then Build Up your bank Of Switches.

Point Extension Lead, 90cm (35") Long.

Point Lead Not Long Enough? These Are All you Will Need, No wire Cutters, Soldering Or electrical Tape Required!!

AC Accessory Adaptor.

Clips On To The Side Of New Kato Controller And Gives Out An AC Current, To Be Used With The Signal Power Supply Unit (24-844) Or For Other AC Powered Items.