|
NCE (North Coast) Systems |
An entire
DCC system in the palm of your hand!
This 2 Amp system can operate 2 or 3 HO sized trains, or 4 N
scale trains. This cab provides all of the capability and ease
of use that you have heard about with the Power Pro system, at an
entry level price.
Installation is a snap. Hook two wires to your track and plug in
the cab. You are off and running trains! The Power Cab kit
contains: Power Cab, 7' Power Cab Cable, PCP Power Panel, Power
Supply (Requires A UK Shaver/Razor adaptor
With 2 Amp Fuse), Pro Cab Coiled Cord, and Full
instruction Manual.
Power Cab™ Specifications:
Power Input Requirements:
10-15V regulated DC, 3A maximum
Power Connector:
5.5mm x 2.5mm center positive
Track Power Output: Voltage input minus (-) .5 Volt 2 Amps peak
Cabs: 2 maximum
Number of simultaneous trains: 12
Number of consists:
16 advanced consists of unlimited number of
Locomotives each. Plus 4 old style consists up to 2 locos each.
Range of locomotive addresses: 0-9999
Range of consist addresses:
112-127
Range of accessory addresses: 1-2044
Range of signal addresses:
1-2044
Computer interface: USB optional *
Now In Stock!!
Pro Cab™ Mode Specifications: When the Power Cab is used as a Pro
Cab, the following specifications apply.
Size:
8-3/4 x 3-5/8” x 1”
Power Requirements: 8 VDC 40mA (backlight off) 8 VDC 120mA
(backlight on)
Replacement Encoder: Bournes or Digikey part #3315C-1-006
Speed control: Thumbwheel operated digital encoder with
adjustable ballistic tracking rate. Pushbutton speed control with
adjustable auto-repeat rate (4 pulses per second to one pulse per 4
seconds).
Backlit LCD Display: 2 line by 16 characters/line. Two extra
display lines available for display of additional information when
used with computer dispatcher programs.
All This For £119.99.
Download the full instructions;
Click Here.
|
Picture Shows Decoders, These are NOT included in the Set,
But You do get a UTP with face plate.
Powerhouse Pro 5 (5 Amp).
The Powerhouse Pro has the ProCab™,
Command Station & Booster All In One Box.
The ProCabTM
Deluxe Cab provides user friendly access to advanced system
features. Uncomplicated menus on the easy to read, back lit LCD
display guide you through the most advanced operations with a
minimum of fuss. This cab is ergonomically designed to correctly
fit both left and right handed operators. The speed controls are
placed directly where your thumb naturally rests - comfortable
even after long operating sessions. We provide both a thumb
wheel knob and repeating push buttons for speed control (Its
Like A Lenz LH100 & LH90 All In One Unit). Control of
single or multiple turnouts, animated accessories and lights is
so simple. Its easy to setup multiple unit consists and assign
them to other cabs or control them yourself. A RECALL button
allows control of 1 to 6 trains per cab. You can also set up
Macros to throw up to 20 points at one time with one press of a
button. Use this cab to access the programming track or the
advanced "programming on the mainline" capabilities of
the NCE Powerhouse Pro. The ProCab is sound system friendly, it
supports all DCC compatible sound units.
The Pro 5 is also the most user friendly DCC system on the
market. Other DCC systems require memorization of arcane
simultaneous button sequences and computer hexadecimal numbers
to accomplish the simplest tasks. Our ProCabTM
walks you through every operation with clearly labelled buttons
and well thought out menu prompts in plain English on the back
lit LCD display of the Cab. The most often performed operations
usually are just a single key press. It includes the user
friendly ProCabTM, Command
Station with integral Five Amp power unit. The Quick Start Guide
in our system reference manual will have you up and running in
less than 20 minutes. Should you ever need it, the entire system
can be easily upgraded by simply swapping out a single program
memory chip (no returns to the factory!). An
RS-232 port is supplied for those wishing to add computer
control to their layout (No Need To Buy An Add On!!).
Dont Believe Us? Then Come And Have A Play
With Our Set In The Shop!!.
All This For £309.99.
|
Picture Shows Decoders, These are NOT included in the Set,
But You do get a UTP with face plate.
|
Powerhouse Pro 5 Radio Fitted. |
As Above But With Built In Radio Transmitter & Receiver.
Special Order Only. |
429.99 |
|
|
Cabs. |
 |
ProCab |
NCE's deluxe cab provides user friendly access
to advanced system features. Uncomplicated menus on the easy to
read, back lit LCD display guide you through the most advanced
operations with a minimum of fuss. This cab is ergonomically
designed to correctly fit both left and right handed operators.
The speed controls are placed directly where your thumb
naturally rests - comfortable even after long operating
sessions. We provide both a thumb wheel knob and repeating push
buttons for speed control. Control of single or multiple
turnouts, animated accessories and lights is a snap. It's easy
to setup multiple unit consists and assign them to other cabs or
control them yourself. A RECALL button allows control of 1 to 6
trains per cab. Use this cab to access the programming track or
the advanced "programming on the mainline"
capabilities of the NCE Powerhouse Pro. The ProCab is sound
system friendly, it supports all DCC compatible sound units. |
99.99 |
|
| |
ProCab Radio |
As Above But With Built In Radio.
Special Order
Only. |
164.99 |
|
 |
CAB04p |
The CAB04p is ideal for operating sessions as
an Engineers cab. It provides easy selection of
locos/consists, single button operation of all decoder
functions, momentary HORN button, selection and control of
individual turnouts or entire routes (via the MACRO key) and our
unique OPTION button that can be programmed to act as any
button you wish, even ones on a much larger cab. A large control
knob (300 degrees rotation) provides smooth speed control. The
cab can also be set to 'Yard' mode which makes the speed knob
act as a 'center off' speed control. Ideal for one handed
switching in the yard. |
59.99 |
|
| |
CAB04pr
Radio |
As Above But With Built In Radio.
Special Order
Only. |
118.99 |
|
 |
CAB04e |
The CAB04e has all the features of the CAB04p
above plus the ability to control two trains. A large knob
provides speed control through a Digital encoder with adjustable
'ballistic tracking'. The faster you turn the knob the faster it
will ratio metrically increase or decrease the speed. |
72.99 |
|
| |
CAB04er
Radio |
As Above But With Built In Radio.
Special Order
Only. |
129.99 |
|
|
Boosters. |
 |
SB3 |
3 Amp Smart Booster.
- For The "Power Cab" System
-
Wireless Compatible
- Requires external power supply.
|
63.99 |
|
 |
PB105 |
5 Amp Booster.
- 5 Full Amps of voltage stabilized power
- Adjustable voltage output from 10 to 18 volts
- Requires external power supply.
|
99.99 |
|
|
Accessories. |
 |
524-223
USB Interface. |
Power Cab USB Interface.
Add this USB computer
interface for computer programming and/or operation of your Power
Cab equipped layout. Requires USB cable, computer and railroad
computer program such as JMRI Decoder Pro
and Panel Pro. |
34.99 |
|
 |
524-222
PCP |
Spare Power Cab Connection Panel. |
15.99 |
|
 |
524-221
P114 |
Power
Cab 2 Amp Peak Power Supply. |
23.99 |
|
 |
524-114
Switch It |
Controls 2 TortoiseTM,
SwitchMasterTM
or other stall motor switch machines.
Simple installation, 2 wires to track, 2 wires to
switch machine. Terminal strip to connect control panel buttons.
Each switch machine can have any legal accessory
address.
|
15.99 |
|
| |
524-136
Switch It - 8 |
Controls 8 TortoiseTM,
SwitchMasterTM
or other stall motor switch machines.
Switch-It remembers
the position of your switches during power outages. Each output of
the decoder can have a completely different accessory address.
Tortoise™ is a registered
trademark of Circuitron, Inc
|
47.95 |
|
 |
524-207
UTP |
UTP-Panel; Cab Bus Connection Panel.
Optional user installed LED to indicate cab bus power. Easy plug-and-play 'daisy chain' connection from panel
to pane. Includes
aluminium plate for layout fascia mounting. Can also be used with Digitrax LoconetTM
|
15.99 |
|
|
Decoders. |
| |
N120AO |
Plug and play N-Scale decoder (with white LEDs) for
Atlas GP40-2, U25B, U23B, B23-7, 30-7, 36-7, GP38, SD25,
TRAINMASTER, etc.
Download A Full Instruction PDF File, Click Here. |
21.99 |
|
| |
N120AOe |
As Above But With Extended LEDs To Fit Intermountain
SD40T-2.
Download A Full Instruction PDF File, Click Here. |
21.99 |
|
|
|
D18SR |
Direct plug-in HO decoder, 8 function outputs, NMRA 8 pin, 0.630 x 1.50. With 1.3 Amp (2 Amp peak) motor drive. Terminates in an eight-pin plug. Size: 1.00" x 0.63" x 0.25". Download A Full Instruction PDF File,
Click Here. |
23.95 |
|
